Milspec Paint
211 Gunther Ln.
Belle Chasse, LA 70037
Office: 504.393.9455
Fax: 504.433.1406
For more information or purchase request
Email: sales@milspecpaint.com
Legal/Privacy Info.
|
|
SIMLAC-700 FAST DRY INDUSTRIAL ENAMEL
Description:
Simlac-700 is a fast drying gloss finish enamel designed for economical exterior performance and protection.
Principle Features:
Provides excellent application characteristics compatible with most alkyd primers.
Technical Data
| Color: |
Standard Colors as per color chart. |
|
| Weight per Gallon: |
Approximately 10.00 lbs. depending upon the color |
|
| Solid content by Volume: |
45-48 % |
|
| Volatile Organic Compound (VOC; before thinning): |
3.60 lbs./gallon |
|
| Theoretical Spreading Rate @1 MDFT: |
Approximately 750 square ft./gallon |
|
| Recommended Dry Film Thickness: |
1.5 - 2.0 Mils |
|
| Drying Time (Dust Free): |
2 Hours |
|
| Minimum Interval before Recoating: |
6 Hours |
|
| Flash Point: |
79ºF |
|
| Recommended Thinner: |
Xylene or T-1 Thinner |
|
Recommended Substrate Conditions:
Steel:Apply over properly prepared primer or abrasive blast to a commercial finish in accordance with SSPC-SP6
Instructions for Use:
Pioneer agitates to uniform consistency using a "squirrel case" type mixer
| Spray Guns: |
|
|
| Conventional Spray: |
|
|
| Manufacturer |
Model |
Tip-Air Cap |
|
| |
|
|
|
| Devilbiss |
MBC or JGA |
704 E |
|
| Binks |
#18 or #62 |
66 PA |
|
Fluid Hose should be 3/8" I.D. with a maximum length of 50 feet. Pot should be at the same elevation as the spray gun.
Safety Precautions:
(A) Use normal precautions such as gloves, facemasks.
(B) Adequate ventilation must be maintained.
(C) Explosion proof lights & electrical equipment.
(D) Non-Sparking shoes & tools for workers in area.
(E) This product contains flammable materials. Forbid all flames, smoking and welding in work area.
(F) Avoid breathing of vapor, contact with skin or eyes. If product comes in contact with skin or eyes, wash thoroughly with water and obtain medical attention.
Non-Warranty:
The technical data listed herein has been compiled for your convenience and guidance, and is based upon our experience and knowledge. However, since we have no control over the use of this information of this product, no warranty expressed or implied, is intended or given. Simco Coatings, Inc. assumes no responsibility whatsoever for coverage, performance, or any other damages, including injuries resulting from use of this information or of products recommended herein.
|
|
